6 DIY Tips To Install Tarkett Vinyl Flooring

Installing Tarkett vinyl flooring can be a rewarding and cost-effective DIY project that can transform the look of your home. Whether you’re a seasoned DIY enthusiast or a beginner, these tips will help you successfully install Tarkett vinyl flooring.

Prepare the subfloor

Before installing Tarkett vinyl flooring

1. Ensure the subfloor is clean, dry, and level.
2. Remove any existing flooring, nails, or debris and repair any uneven areas.
3. If necessary, use a self-leveling compound to create a smooth and even surface.

A well-prepared subfloor is crucial for the longevity and stability of the vinyl flooring.

Acclimate the flooring

Allow the Tarkett vinyl flooring to acclimate to the room where it will be installed. Lay the unopened boxes of flooring flat on the subfloor for at least 48 hours before installation. This helps the vinyl adjust to the temperature and humidity of the room, reducing the risk of expansion or contraction after installation.

Measure and plan

Carefully measure the room’s dimensions and calculate the square footage needed for the Tarkett vinyl flooring. Consider adding 5-10% extra to account for cuts and mistakes. Plan the flooring layout, starting from the center of the room and working outward. This will help ensure a balanced and visually appealing installation.

Use the right tools

The right tools will make the installation process smoother and more efficient. Some essential tools for installing Tarkett vinyl flooring include a tape measure, utility knife, straight edge, rolling pin or laminate roller, and a heat gun or hairdryer for heating and molding the vinyl if necessary. Follow the manufacturer’s guidelines and recommendations for specific tools and techniques.

Install underlayment

An underlayment may sometimes be required to provide additional cushioning, sound absorption, or moisture protection. Check the Tarkett vinyl flooring product specifications to determine if an underlayment is necessary and follow the manufacturer’s instructions for installation. This step will help enhance the performance and durability of the flooring.

Cut and fit the vinyl

Measure and mark the Tarkett vinyl flooring carefully before cutting. Use a sharp utility knife and a straight edge to make precise cuts. Test the fit of each piece before permanently adhering it to the subfloor. Remember to leave a small gap around the room’s edges to allow for expansion. Use transition strips or moldings to cover the gaps for a polished look.